Bienvenido(a) a Alcance Libre 13/09/2025, 04:45

Alcance Libre Foros

 Índice del foro > Todo acerca de Linux > Redes y Servidores New Topic Post Reply
 Montar modem
Tópico anterior Tópico siguiente
   
kokerlo
 05/07/08 09:12 (Leído 2,492 veces)  

Nuevo

Estado: desconectado
Forum User

Identificado: 05/07/08
Mensajes: 2
Hola axcabo de instalar ubuntu 8.04 y tengo problemas al conectarme a internet Geek, al parecer no me reconce el modem (según en microsoft el modem es: PCI Soft Data Fax Modem with SmartCP), ¿Como puedo hacer para montar el modem? no tengo ni la menor idea de como hacerlo Rolling Eyes, por su ayuda, gracias
 
Profile Email
 Quote
Rodolfo Lameda Diaz Tejeda
 07/07/08 01:20  

Nuevo

Estado: desconectado
Forum User

Identificado: 18/02/07
Mensajes: 11
Localización:Nápoles, México.
Primero date una vuelta por este sitio y checa y si tu winmodem esta soportado por linux.

http://www.linmodems.org/


Aprendiendo a ser root... www.increm.net
 
Profile Email Website
 Quote
kokerlo
 07/07/08 08:29  

Nuevo

Estado: desconectado
Forum User

Identificado: 05/07/08
Mensajes: 2
HOLA USE SCANMODEM y me salio esto:

Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.24-16-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008
scanModem update of: 2008_06_28

There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 0471:060c Philips
ID 058f:6377 Alcor Micro Corp.
ID 054c:0243 Sony Corp.

USB modems not recognized

For candidate card in slot 01:05.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:05.0 14f1:2f20 14f1:200c Communication controller: Conexant HSF 56k Data/Fax Modem

Modem interrupt assignment and sharing:
17: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
--- Bootup diagnostics for card in PCI slot 01:05.0 ----

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 103c:2a50 Audio device: Intel Corporation 82801G

Modem interrupt assignment and sharing:
19: 21948 0 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel, ivtv0, i915@pci:0000:00:02.0
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 47.826322] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 47.826343] PCI: Setting latency timer of device 0000:00:1b.0 to 64


===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.24-16-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko

The ALSA verion is 1.0.15
The modem cards detected by "aplay -l" are: None


The /proc/asound/pcm file reports:
-----------------------
00-02: ALC883 Analog : ALC883 Analog : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1 : capture 1
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfdff8000 irq 19
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 01:05.0:
Modem chipset detected on
NAME="Communication controller: Conexant HSF 56k Data/Fax Modem"
CLASS=0780
PCIDEV=14f1:2f20
SUBSYS=14f1:200c
IRQ=7
IDENT=hsfmodem

For candidate modem in: 01:05.0
0780 Communication controller: Conexant HSF 56k Data/Fax Modem
Primary device ID: 14f1:2f20
Support type needed or chipset: hsfmodem



Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.68.00.07full_k2.6.24_16_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.

Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt



Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=103c:2a50
IRQ=19
HDA=8086:27d8
SOFT=8086:27d8.HDA


High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:27d8.
If another modem card is present, then most likely 8086:27d8 does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 8086:27d8, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
sudo wvdialconf /etc/wvdial.conf

For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801G
Primary device ID: 8086:27d8
Subsystem PCI_id 103c:2a50
Softmodem codec or chipset from diagnostics:
from Archives:



Support type needed or chipset:

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.2.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/

----------------end Softmodem section --------------
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.2.3
and the compiler used in kernel assembly: 4.2.3



Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.24-16-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,
linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 14:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-baseSurprised!ptions snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-baseSurprised!ptions snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


Despues de esto ya no se que hacer, espero y me puedan ayudar gracias
 
Profile Email
 Quote
Contenido generado en: 0.11 segundos New Topic Post Reply
 Todas las horas son CST. Hora actual 04:45 .
Tópico normal Tópico normal
Tópico Pegado Tópico Pegado
Tópico bloqueado Tópico bloqueado
Mensaje Nuevo Mensaje Nuevo
Tópico pegado con nuevo mensaje Tópico pegado con nuevo mensaje
Tópico bloqueado con nuevo mensaje Tópico bloqueado con nuevo mensaje
Ver mensajes anónimos 
Los usuarios anónimos pueden enviar 
Se permite HTML Filtrado 
Contenido censurado