HD parece que esta a punto de morir? o es otro tipo de log.?

Bienvenido(a) a Alcance Libre 05/09/2025, 21:31

Alcance Libre Foros

	Índice del foro > Software Libre en Windows > General	New Topic Post Reply
HD parece que esta a punto de morir? o es otro tipo de log.?

David Rosado

15/03/08 05:38 (Leído 2,633 veces)

Moderador

Estado: desconectado

Identificado: 21/02/07
Mensajes: 154
Localización:Ecuador

Saludos compañeros, tengo unos mensajes en los logs de “/var/log/messages” los cuales me salen de esta forma:

PHP Formatted Code
Mar 1518:13:27 corp-190-12-4-250-cue kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen

Mar 1518:13:27 corp-190-12-4-250-cue kernel: ata1.00: cmd c8/00:08:45:7b:32/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 in

Mar 1518:13:27 corp-190-12-4-250-cue kernel:          res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4(timeout)

Mar 1518:13:27 corp-190-12-4-250-cue kernel: ata1: soft resetting port

Mar 1518:13:29 corp-190-12-4-250-cue kernel: ata1.00: configured for UDMA/100

Mar 1518:13:29 corp-190-12-4-250-cue kernel: ata1: EH complete

Mar 1518:13:29 corp-190-12-4-250-cue kernel: SCSI device sda:156301488512-byte hdwr sectors (80026 MB)

Mar 1518:13:29 corp-190-12-4-250-cue kernel: sda: Write Protect is off

Mar 1518:13:29 corp-190-12-4-250-cue kernel: SCSI device sda: drive cache: write back

El cual no se si este en lo correcto pero me parece que el error que me marca es de un(os) sector(es) dañado( s) del HD, si es así que opción me pueden dar para poder reparar esto, a lo mejor ejecutar un “fsck -fyc” desde el disco 1 de CentOS me pueda ayudar, pero que me recomiendan Uds. o me tocaría cambiar este HD.??

El servidor se cuelga en el momento menos esperado, ya configure el smartd para que me envíe mensajes a mi correo para ver que mismo es, pero espero que me puedan ayudar con alguna solución.

Gracias por sus comentarios.

Profile

Quote

Joel Barrios Dueñas

15/03/08 07:58

Admin

Estado: desconectado

Identificado: 17/02/07
Mensajes: 1761
Localización:Mexico

Cambia el disco duro,No tarda en tronar por completo.

Ejecuta smartctl -a /dev/sda para ver lo que le resta de vida.

Profile

Website

Quote

David Rosado

15/03/08 08:11

Moderador

Estado: desconectado

Identificado: 21/02/07
Mensajes: 154
Localización:Ecuador

me sale esto cuando pongo el comando "smartctl -a -d ata /dev/sda"

PHP Formatted Code
smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C)2002-6 Bruce Allen

Home page is http://smartmontools.sourceforge.net/

Device: ATA      ST3808110AS      Version:3.AA

In Linux, SATA disks accessed via libata are only supported by smartmontools
for kernel versions 2.6.15 and above. Try an additional '-d ata' argument.

[root@serverflash dansguardian]# 

[root@serverflash dansguardian]# smartctl -a -d ata /dev/sda

smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C)2002-6 Bruce Allen

Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===

Device Model:     ST3808110AS

Serial Number:    5LR6BTV9

Firmware Version:3.AAH

User Capacity:80,026,361,856 bytes

Device is:        Not in smartctl database [for details use: -P showall]

ATA Version is:7

ATA Standard is:  Exact ATA specification draft version not indicated

Local Time is:    Sat Mar 1521:03:272008 ECT

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:

Offline data collection status:(0x82) Offline data collection activity

                                        was completed without error.

                                        Auto Offline Data Collection: Enabled.

Self-test execution status:(0) The previous self-test routine completed

                                        without error or no self-test has ever 

                                        been run.

Total time to complete Offline 

data collection:(430) seconds.

Offline data collection

capabilities:(0x5b) SMART execute Offline immediate.

                                        Auto Offline data collection on/off support.

                                        Suspend Offline collection upon new

                                        command.

                                        Offline surface scan supported.

                                        Self-test supported.

                                        No Conveyance Self-test supported.

                                        Selective Self-test supported.

SMART capabilities:(0x0003) Saves SMART data before entering

                                        power-saving mode.

                                        Supports SMART auto save timer.

Error logging capability:(0x01) Error logging supported.

                                        General Purpose Logging supported.

Short self-test routine 

recommended polling time:(1) minutes.

Extended self-test routine

recommended polling time:(27) minutes.

SMART Attributes Data Structure revision number:10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate     0x000f112088006    Pre-fail  Always       -46413852
3 Spin_Up_Time            0x0003098094000    Pre-fail  Always       -0
4 Start_Stop_Count        0x0032100100020    Old_age   Always       -514
5 Reallocated_Sector_Ct   0x0033100100036    Pre-fail  Always       -0
7 Seek_Error_Rate         0x000f078060030    Pre-fail  Always       -66565552
9 Power_On_Hours          0x0032098098000    Old_age   Always       -1884
10 Spin_Retry_Count        0x0013099099097    Pre-fail  Always       -0
12 Power_Cycle_Count       0x0032100100020    Old_age   Always       -761
187 Unknown_Attribute       0x0032083083000    Old_age   Always       -17
189 Unknown_Attribute       0x003a100100000    Old_age   Always       -0
190 Unknown_Attribute       0x0022069061045    Old_age   Always       -555679775
194 Temperature_Celsius     0x0022031040000    Old_age   Always       -31(Lifetime Min/Max0/19)
195 Hardware_ECC_Recovered  0x001a060046000    Old_age   Always       -96496638
197 Current_Pending_Sector  0x0012001001000    Old_age   Always       -4294967295
198 Offline_Uncorrectable   0x0010001001000    Old_age   Offline      -4294967295
199 UDMA_CRC_Error_Count    0x003e200200000    Old_age   Always       -0
200 Multi_Zone_Error_Rate   0x0000100253000    Old_age   Offline      -0
202 TA_Increase_Count       0x0032100253000    Old_age   Always       -0

SMART Error Log Version:1

ATA Error Count:21(device log contains only the most recent five errors)

        CR = Command Register [HEX]

        FR = Features Register [HEX]

        SC = Sector Count Register [HEX]

        SN = Sector Number Register [HEX]

        CL = Cylinder Low Register [HEX]

        CH = Cylinder High Register [HEX]

        DH = Device/Head Register [HEX]

        DC = Device Command Register [HEX]

        ER = Error register [HEX]

        ST = Status register [HEX]

Powered_Up_Time is measured from power on, and printed as

DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,

SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 21 occurred at disk power-on lifetime:1426 hours (59 days +10 hours)

  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:

  ER ST SC SN CL CH DH
--------------
405100 a7 f3 24 e1  Error: UNC at LBA =0x0124f3a7=19198887

  Commands leading to the command that caused the error were:

  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
----------------------------------------------------

  c8 0018 9a f3 24 e1 0002:11:27.719  READ DMA

  ec 0000 a7 f3 24 a0 0002:11:27.718  IDENTIFY DEVICE

  c8 0018 9a f3 24 e1 0002:11:25.817  READ DMA

  ec 0000 a7 f3 24 a0 0002:11:25.816  IDENTIFY DEVICE

  c8 0018 9a f3 24 e1 0002:11:23.915  READ DMA

Error 20 occurred at disk power-on lifetime:1426 hours (59 days +10 hours)

  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:

  ER ST SC SN CL CH DH
--------------
405100 a7 f3 24 e1  Error: UNC at LBA =0x0124f3a7=19198887

  Commands leading to the command that caused the error were:

  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
----------------------------------------------------

  c8 0018 9a f3 24 e1 0002:11:27.719  READ DMA

  ec 0000 a7 f3 24 a0 0002:11:27.718  IDENTIFY DEVICE

  c8 0018 9a f3 24 e1 0002:11:25.817  READ DMA

  ec 0000 a7 f3 24 a0 0002:11:25.816  IDENTIFY DEVICE

  c8 0018 9a f3 24 e1 0002:11:23.915  READ DMA

Error 19 occurred at disk power-on lifetime:1426 hours (59 days +10 hours)

  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:

  ER ST SC SN CL CH DH
--------------
405100 a7 f3 24 e1  Error: UNC at LBA =0x0124f3a7=19198887

  Commands leading to the command that caused the error were:

  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
----------------------------------------------------

  c8 0018 9a f3 24 e1 0002:11:27.719  READ DMA

  ec 0000 a7 f3 24 a0 0002:11:27.718  IDENTIFY DEVICE

  c8 0018 9a f3 24 e1 0002:11:25.817  READ DMA

  ec 0000 a7 f3 24 a0 0002:11:25.816  IDENTIFY DEVICE

  c8 0018 9a f3 24 e1 0002:11:23.915  READ DMA

Error 18 occurred at disk power-on lifetime:1426 hours (59 days +10 hours)

  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:

  ER ST SC SN CL CH DH
--------------
405100 a7 f3 24 e1  Error: UNC at LBA =0x0124f3a7=19198887

  Commands leading to the command that caused the error were:

  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
----------------------------------------------------

  c8 0018 9a f3 24 e1 0002:11:20.997  READ DMA

  ec 0000 a7 f3 24 a0 0002:11:20.997  IDENTIFY DEVICE

  c8 0018 9a f3 24 e1 0002:11:25.817  READ DMA

  ec 0000 a7 f3 24 a0 0002:11:25.816  IDENTIFY DEVICE

  c8 0018 9a f3 24 e1 0002:11:23.915  READ DMA

Error 17 occurred at disk power-on lifetime:1426 hours (59 days +10 hours)

  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:

  ER ST SC SN CL CH DH
--------------
405100 a7 f3 24 e1  Error: UNC at LBA =0x0124f3a7=19198887

  Commands leading to the command that caused the error were:

  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
----------------------------------------------------

  c8 0018 9a f3 24 e1 0002:11:20.997  READ DMA

  ec 0000 a7 f3 24 a0 0002:11:20.997  IDENTIFY DEVICE

  c8 0018 9a f3 24 e1 0002:11:20.997  READ DMA

  c8 0018 7a f3 24 e1 0002:11:20.994  READ DMA

  c8 0008 6a f3 24 e1 0002:11:23.915  READ DMA

SMART Self-test log structure revision number 1

SMART Selective self-test log data structure revision number 1

 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
100  Not_testing
200  Not_testing
300  Not_testing
400  Not_testing
500  Not_testing

Selective self-test flags (0x0):

  After scanning selected spans,do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.