Doble Rango en Servidor UDHCP

Bienvenido(a) a Alcance Libre 09/09/2025, 05:46

Alcance Libre Foros

	Índice del foro > Todo acerca de Linux > Redes y Servidores	New Topic Post Reply
Doble Rango en Servidor UDHCP

Federico Genellini

26/07/13 08:47 (Leído 3,933 veces)

Nuevo

Estado: desconectado

Identificado: 28/12/12
Mensajes: 1

Buenos días Gente, es mi primer tema en el foro, concurro muy seguido pero nunca hice preguntas porque estaba todo lo que buscaba. Es una consulta simple (No tanto porque sino lo hubiese hecho, ja!) Tengo un Ubuntu Server 13.04 64Bits el cual configure un Squid3, con Dansguardian y a su vez hace de puerta de enlace y Servidor DHCP para las máquinas de la empresa. Cuando estaba instalando los paquetes me sugirió udhpd, en vez de "dhcpd"; lo instalé y configuré perfecto, pero el tema es que quiero poner dos rangos de IP y no me lo toma. Por ej quiero que sea de 192.168.30.175-192.168.30.199 y 192.168.30.220-192.168.30.245. Posteo mi archivo de configuración.

PHP Formatted Code
# Sample udhcpd configuration file (/etc/udhcpd.conf)

# The start and end of the IP lease block

start           192.168.30.175  #default: 192.168.0.20

end             192.168.30.199  #default: 192.168.0.254

start           192.168.30.220
end             192.168.30.245

# The interface that udhcpd will use

interface       eth1    #default: eth0

# The maximim number of leases (includes addressesd reserved

# by OFFER's, DECLINE's, and ARP conficts

#max_leases     254             #default: 254

# If remaining is true (default), udhcpd will store the time

# remaining for each lease in the udhcpd leases file. This is

# for embedded systems that cannot keep time between reboots.

# If you set remaining to no, the absolute time that the lease

# expires at will be stored in the dhcpd.leases file.

#remaining      yes             #default: yes

# The time period at which udhcpd will write out a dhcpd.leases

# file. If this is 0, udhcpd will never automatically write a

# lease file. (specified in seconds)

#auto_time      7200            #default: 7200 (2 hours)

# The amount of time that an IP will be reserved (leased) for if a

# DHCP decline message is received (seconds).

#decline_time   3600            #default: 3600 (1 hour)

# The amount of time that an IP will be reserved (leased) for if an

# ARP conflct occurs. (seconds

#conflict_time  3600            #default: 3600 (1 hour)

# How long an offered address is reserved (leased) in seconds

#offer_time     60              #default: 60 (1 minute)

# If a lease to be given is below this value, the full lease time is

# instead used (seconds).

#min_lease      60              #defult: 60

# The location of the leases file

#lease_file     /var/lib/misc/udhcpd.leases     #defualt: /var/lib/misc/udhcpd.leases

# The location of the pid file

#pidfile        /var/run/udhcpd.pid     #default: /var/run/udhcpd.pid

# Everytime udhcpd writes a leases file, the below script will be called.

# Useful for writing the lease file to flash every few hours.

#notify_file                            #default: (no script)

#notify_file    dumpleases      # <--- useful for debugging

# The following are bootp specific options, setable by udhcpd.

#siaddr         192.168.0.22            #default: 0.0.0.0

#sname          zorak                   #default: (none)

#boot_file      /var/nfs_root           #default: (none)

# The remainer of options are DHCP options and can be specifed with the

# keyword 'opt' or 'option'. If an option can take multiple items, such

# as the dns option, they can be listed on the same line, or multiple

# lines. The only option with a default is 'lease'.

#Examles

opt     dns     192.168.5.2

option  subnet  255.255.255.0

opt     router  192.168.30.1
#opt    wins    192.168.10.10

#option dns     129.219.13.81   # appened to above DNS servers for a total of 3

option  domain  local

option  lease   36000# 10 days of seconds

# Currently supported options, for more info, see options.c

#opt subnet

#opt timezone

#opt router

#opt timesrv

#opt namesrv

#opt dns

#opt logsrv

#opt cookiesrv

#opt lprsrv

#opt bootsize

#opt domain

#opt swapsrv

#opt rootpath

#opt ipttl

#opt mtu

#opt broadcast

#opt wins

#opt lease

#opt ntpsrv

#opt tftp

#opt bootfile

#opt wpad

# Static leases map

#static_lease 00:60:08:11:CE:4E 192.168.0.54

#static_lease 00:60:08:11:CE:3E 192.168.0.44