Hola, resulta que tengo un Centos 5 con Samba Domain y LDAP, he seguido las instrucciones que están en http://www.alcancelibre.org/staticpages/index.php/SAMBALDAP-CENTOS5, pero al momento en que estoy ingresando la máquina al dominio me envia el mensaje "Usuario no existe", pero cuando reviso el log de samba el usuario ldap si lo autentica bien pero cuando quiere crear la máquina con el comando add machine script = /usr/local/sbin/smbldap-useradd.pl -w %u que se encuentra en el smb.conf dice permiso denegado, sin embargo cuando creo manualmente la máquina en linux lo hace bien y luego la ingreso a dominio sin problemas, ya le he dado vueltas al asunto y no logro saber x que no la crea automaticamente al momento de ingresarla al dominio, les adjunto mis archivos de configuración, espero me puedan ayudar

Lo único que se me ocurra es q el usuario necesite permisos de creacion en el slap.conf o en el samba, si es así como le doy permiso???

-------------------------------------
LDAP.CONF
-------------------------------------
#
# LDAP Defaults
#
# See ldap.conf(5) for details
# This file should be world readable but not world writable.

#BASE dc=example, dc=com
#URI ldap://ldap.example.com ldap://ldap-master.example.com:666

#SIZELIMIT 12
#TIMELIMIT 15
#DEREF never
TLS_CACERTDIR /etc/openldap/cacerts

URI ldap://127.0.0.1/
BASE dc=psg,dc=local
-------------------------------------------
FIN DE LDAP
-------------------------------------------
-------------------------------------------
SLAPD.CONF
-------------------------------------------
#
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
#
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
include /etc/openldap/schema/samba.schema

# Allow LDAPv2 client connections. This is NOT the default.
allow bind_v2

# Do not enable referrals until AFTER you have a working directory
# service AND an understanding of referrals.
#referral ldap://root.openldap.org

pidfile /var/run/openldap/slapd.pid
argsfile /var/run/openldap/slapd.args

# Load dynamic backend modules:
# modulepath /usr/lib/openldap
# moduleload back_bdb.la
# moduleload back_ldap.la
# moduleload back_ldbm.la
# moduleload back_passwd.la
# moduleload back_shell.la

# The next three lines allow use of TLS for encrypting connections using a
# dummy test certificate which you can generate by changing to
# /etc/pki/tls/certs, running "make slapd.pem", and fixing permissions on
# slapd.pem so that the ldap user or group can read it. Your client software
# may balk at self-signed certificates, however.
# TLSCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
# TLSCertificateFile /etc/pki/tls/certs/slapd.pem
# TLSCertificateKeyFile /etc/pki/tls/certs/slapd.pem

# Sample security restrictions
# Require integrity protection (prevent hijacking)
# Require 112-bit (3DES or better) encryption for updates
# Require 63-bit encryption for simple bind
# security ssf=1 update_ssf=112 simple_bind=64

# Sample access control policy:
# Root DSE: allow anyone to read it
# Subschema (sub)entry DSE: allow anyone to read it
# Other DSEs:
# Allow self write access
# Allow authenticated users read access
# Allow anonymous users to authenticate
# Directives needed to implement policy:
# access to dn.base="" by * read
# access to dn.base="cn=Subschema" by * read
# access to *
# by self write
# by users read
# by anonymous auth
#
# if no access controls are present, the default policy
# allows anyone and everyone to read anything but restricts
# updates to rootdn. (e.g., "access to * by * read"
#
# rootdn can always read and write EVERYTHING!

#access to attrs=userPassword
# by self write
# by anonymous auth
# by dn.base="cn=Administrador,dc=psg,dc=local" write
# by * none
#access to *
# by self write
# by dn.base="cn=Administrador,dc=psg,dc=local" write
# by * read
#######################################################################
# ldbm and/or bdb database definitions
#######################################################################

database bdb
suffix "dc=psg,dc=local"
rootdn "cn=Administrador,dc=psg,dc=local"
# Cleartext passwords, especially for the rootdn, should
# be avoided. See slappasswd(8) and slapd.conf(5) for details.
# Use of strong authentication encouraged.
# rootpw secret
# rootpw {crypt}ijFYNcSNctBYg
rootpw {SSHA}Y+v1TmocqzcsCuB7A1XCnMUnf4WhefBL

#overlay syncprov
#syncprov-checkpoint 100 10
#syncprov-sessionlog 100

# The database directory MUST exist prior to running slapd AND
# should only be accessible by the slapd and slap tools.
# Mode 700 recommended.
directory /var/lib/ldap/autenticar

# Indices to maintain for this database
#index objectClass eq,pres
#index ou,cn,mail,surname,givenname eq,pres,sub
#index uidNumber,gidNumber,loginShell eq,pres
#index uid,memberUid eq,pres,sub
#index nisMapName,nisMapEntry eq,pres,sub
index objectClass eq
index cn pres,sub,eq
index sn pres,sub,eq
index uid pres,sub,eq
index displayName pres,sub,eq
index uidNumber eq
index gidNumber eq
index memberUID eq
index sambaSID eq
index sambaPrimaryGroupSID eq
index sambaDomainName eq
index default sub

# Replicas of this database
#replogfile /var/lib/ldap/openldap-master-replog
#replica host=ldap-1.example.com:389 starttls=critical
# bindmethod=sasl saslmech=GSSAPI
# authcId=host/ldap-master.example.com@EXAMPLE.COM
-------------------------------------------
FIN DE SLAPD.CONF
-------------------------------------------

-------------------------------------------
SMB.CONF
-------------------------------------------
[global]
workgroup = PSG
server string = trixbox PBX
netbios name = srvcentos

admin users = Administrator @"Domain Admins"
passdb backend = ldapsam:ldap://localhost

ldap suffix = dc=psg,dc=local
ldap user suffix = ou=People
ldap group suffix = ou=Group
ldap machine suffix = ou=Computers
ldap admin dn = cn=Administrador,dc=psg,dc=local
ldap passwd sync = yes
add machine script = /usr/sbin/smbldap-useradd -w %u

security = user
encrypt passwords = yes
os level = 65
domain master = yes
preferred master = yes
domain logons = yes

[share]
path = /
guest ok = yes
writeable = yes
create mask = 0777
-------------------------------------------
FIN SMB.CONF
-------------------------------------------

-------------------------------------------
SMBLDAP.CONF
-------------------------------------------
# $Source: $
# $Id: smbldap.conf,v 1.18 2005/05/27 14:28:47 jtournier Exp $
#
# smbldap-tools.conf : Q & D configuration file for smbldap-tools

# This code was developped by IDEALX (http://IDEALX.org/) and
# contributors (their names can be found in the CONTRIBUTORS file).
#
# Copyright (C) 2001-2002 IDEALX
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
# USA.

# Purpose :
# . be the configuration file for all smbldap-tools scripts

##############################################################################
#
# General Configuration
#
##############################################################################

# Put your own SID. To obtain this number do: "net getlocalsid".
# If not defined, parameter is taking from "net getlocalsid" return
SID="S-1-5-21-1148663585-3460757713-846424855"

# Domain name the Samba server is in charged.
# If not defined, parameter is taking from smb.conf configuration file
# Ex: sambaDomain="IDEALX-NT"
sambaDomain="PSG"

##############################################################################
#
# LDAP Configuration
#
##############################################################################

# Notes: to use to dual ldap servers backend for Samba, you must patch
# Samba with the dual-head patch from IDEALX. If not using this patch
# just use the same server for slaveLDAP and masterLDAP.
# Those two servers declarations can also be used when you have
# . one master LDAP server where all writing operations must be done
# . one slave LDAP server where all reading operations must be done
# (typically a replication directory)

# Slave LDAP server
# Ex: slaveLDAP=127.0.0.1
# If not defined, parameter is set to "127.0.0.1"
slaveLDAP="127.0.0.1"

# Slave LDAP port
# If not defined, parameter is set to "389"
slavePort="389"

# Master LDAP server: needed for write operations
# Ex: masterLDAP=127.0.0.1
# If not defined, parameter is set to "127.0.0.1"
masterLDAP="127.0.0.1"

# Master LDAP port
# If not defined, parameter is set to "389"
#masterPort="389"
masterPort="389"

# Use TLS for LDAP
# If set to 1, this option will use start_tls for connection
# (you should also used the port 389)
# If not defined, parameter is set to "0"
#ldapTLS="1"

# Use SSL for LDAP
# If set to 1, this option will use SSL for connection
# (standard port for ldaps is 636)
# If not defined, parameter is set to "0"
ldapSSL="0"

# How to verify the server's certificate (none, optional or require)
# see "man Net::LDAP" in start_tls section for more details
#verify="require"

# CA certificate
# see "man Net::LDAP" in start_tls section for more details
#cafile="/etc/smbldap-tools/ca.pem"

# certificate to use to connect to the ldap server
# see "man Net::LDAP" in start_tls section for more details
#clientcert="/etc/smbldap-tools/smbldap-tools.iallanis.info.pem"

# key certificate to use to connect to the ldap server
# see "man Net::LDAP" in start_tls section for more details
#clientkey="/etc/smbldap-tools/smbldap-tools.iallanis.info.key"

# LDAP Suffix
# Ex: suffix=dc=IDEALX,dc=ORG
suffix="dc=psg,dc=local"

# Where are stored Users
# Ex: usersdn="ou=Users,dc=IDEALX,dc=ORG"
# Warning: if 'suffix' is not set here, you must set the full dn for usersdn
usersdn="ou=People,${suffix}"

# Where are stored Computers
# Ex: computersdn="ou=Computers,dc=IDEALX,dc=ORG"
# Warning: if 'suffix' is not set here, you must set the full dn for computersdn
computersdn="ou=Computers,${suffix}"

# Where are stored Groups
# Ex: groupsdn="ou=Groups,dc=IDEALX,dc=ORG"
# Warning: if 'suffix' is not set here, you must set the full dn for groupsdn
groupsdn="ou=Group,${suffix}"

# Where are stored Idmap entries (used if samba is a domain member server)
# Ex: groupsdn="ou=Idmap,dc=IDEALX,dc=ORG"
# Warning: if 'suffix' is not set here, you must set the full dn for idmapdn
idmapdn="ou=Idmap,${suffix}"

# Where to store next uidNumber and gidNumber available for new users and groups
# If not defined, entries are stored in sambaDomainName object.
# Ex: sambaUnixIdPooldn="sambaDomainName=${sambaDomain},${suffix}"
# Ex: sambaUnixIdPooldn="cn=NextFreeUnixId,${suffix}"
sambaUnixIdPooldn="sambaDomainName=${sambaDomain},${suffix}"

# Default scope Used
scope="sub"

# Unix password encryption (CRYPT, MD5, SMD5, SSHA, SHA, CLEARTEXT)
# En este parametro ya he probado con seguridad SSHA y MD5
hash_encrypt="MD5"

# if hash_encrypt is set to CRYPT, you may set a salt format.
# default is "%s", but many systems will generate MD5 hashed
# passwords if you use "$1$%.8s". This parameter is optional!
crypt_salt_format="%s"

##############################################################################
#
# Unix Accounts Configuration
#
##############################################################################

# Login defs
# Default Login Shell
# Ex: userLoginShell="/bin/bash"
userLoginShell="/bin/bash"

# Home directory
# Ex: userHome="/home/%U"
userHome="/home/%U"

# Default mode used for user homeDirectory
userHomeDirectoryMode="700"

# Gecos
userGecos="System User"

# Default User (POSIX and Samba) GID
defaultUserGid="513"

# Default Computer (Samba) GID
defaultComputerGid="515"

# Skel dir
skeletonDir="/etc/skel"

# Default password validation time (time in days) Comment the next line if
# you don't want password to be enable for defaultMaxPasswordAge days (be
# careful to the sambaPwdMustChange attribute's value)
defaultMaxPasswordAge="45"

##############################################################################
#
# SAMBA Configuration
#
##############################################################################

# The UNC path to home drives location (%U username substitution)
# Just set it to a null string if you want to use the smb.conf 'logon home'
# directive and/or disable roaming profiles
# Ex: userSmbHome="\\PDC-SMB3\%U"
userSmbHome="\\srvcentos\%U"

# The UNC path to profiles locations (%U username substitution)
# Just set it to a null string if you want to use the smb.conf 'logon path'
# directive and/or disable roaming profiles
# Ex: userProfile="\\PDC-SMB3\profiles\%U"
userProfile="\\srvcentos\profiles\%U"

# The default Home Drive Letter mapping
# (will be automatically mapped at logon time if home directory exist)
# Ex: userHomeDrive="H:"
userHomeDrive="H:"

# The default user netlogon script name (%U username substitution)
# if not used, will be automatically username.cmd
# make sure script file is edited under dos
# Ex: userScript="startup.cmd" # make sure script file is edited under dos
#userScript="logon.bat"

# Domain appended to the users "mail"-attribute
# when smbldap-useradd -M is used
# Ex: mailDomain="idealx.com"
#mailDomain="iallanis.info"

##############################################################################
#
# SMBLDAP-TOOLS Configuration (default are ok for a RedHat)
#
##############################################################################

# Allows not to use smbpasswd (if with_smbpasswd == 0 in smbldap_conf.pm) but
# prefer Crypt::SmbHash library
with_smbpasswd="0"
smbpasswd="/usr/bin/smbpasswd"

# Allows not to use slappasswd (if with_slappasswd == 0 in smbldap_conf.pm)
# but prefer Crypt:: libraries
with_slappasswd="0"
slappasswd="/usr/sbin/slappasswd"

# comment out the following line to get rid of the default banner
# no_banner="1"
-------------------------------------------
FIN SMBLDAP.CONF
-------------------------------------------

-------------------------------------------
SMBLDAP_BIND.CONF
-------------------------------------------
############################
# Credential Configuration #
############################
# Notes: you can specify two differents configuration if you use a
# master ldap for writing access and a slave ldap server for reading access
# By default, we will use the same DN (so it will work for standard Samba
# release)
slaveDN="cn=Administrador,dc=psg,dc=local"
slavePw="12345"
masterDN="cn=Administrador,dc=psg,dc=local"
masterPw="12345"
-------------------------------------------
FIN SMBLDAP_BIND.CONF
-------------------------------------------

Saludos,