Bienvenido(a) a Alcance Libre 03/02/2023, 19:51
|
![]() |
Índice del foro > Todo acerca de Linux > Asterisk y VoIP |
![]() ![]() |
![]() |
ctamez |
|
||||||
![]() ![]() ![]() ![]() ![]() Participa poco ![]() ![]() Estado: desconectado ![]() Identificado: 12/26/07 Mensajes: 15 |
buenas noches:
quiero anexar una seccion de Free PBX que no comprendo del todo, pero podria ser la respuesta a mi problema de no poder sacar o recivir llamadas, garcias de antemano. Zap Channel DIDs allow you to assign a DID to specific Zap Channels. You can supply the same DID to multiple channels. This would be a common scenario if you have multiple POTS lines that are on a hunt group from your provider. You MUST assign the channel's context to from-zaptel for these settings to have effect. It will be a line that looks like: context = from-zaptel in your zapata.conf configuration effecting the specified channel(s). Once you have assigned DIDs you can use standard Inbound Routes with the specified DIDs to route your calls. Add Channel Channel:The Zap Channel number to map to a DID Description:A useful description describing this channel DID:The DID that this channel represents. The incoming call on this channel will be treated as if it came in with this DID and can be managed with Inbound Routing on DIDs QUES es un DID?, si alguien me pudiera orientar se lo agradeceria mucho, Saludos!!!! |
||||||
|
|||||||
Contenido generado en: 0.06 segundos |
![]() ![]() |
Todas las horas son CST. Hora actual 07:51 PM. |
|
|